Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; Cleaning And Care; Troubleshooting - Klarstein 10024021 Handbuch

Vorschau ausblenden Andere Handbücher für 10024021:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Operation

• The inside temperature of the thermoelectric wine cooler depends on the room temperature. The wine coo-
ler can be adjusted in the range of 8°—18°C (± 1°C), when it is located in an ideal room temperature of 25°C.By
first time turn on, without putting any bottle inside the wine cooler, the product can be cooled to 15°C after
1.5 hours and after 2~2.5 hours more will reach to the temperature programmed by the manufacturer.
• You could set the temperature by touching the UP and DOWN button with your finger. When the inside
temperature higher than the setting point cooling system will be work normally. When the inside tempera-
ture lower than the setting point, cooling system stop working. And the inside temperature will rise. When it
raises above the setting point, Cooling System starts to work again, the cellar enters into cooling circles.
• This wine cooler have a LED light located on the top of cavity interior. You can turn the interior light ON or
OFF by pressing the light switch.
Important Hints
• In order to function at its potential, the wine cooler needs to be placed on flat floor, with 2cm spaces at each
side and 10cm at the backside.
• Use the adjustable (iron case) to place the cellar fully horizontal.
• Avoid direct sunshine and carry high temperature.
• Hot food should be cooled down before placing in the cellar. Do not mix uncooked food with cooked food.
• Do not place heavy articles on the top of the cellar
• Shut off power supply before cleaning cabinet.
• Take out wine and shelves, and then clean the cabinet with soda water first and with clean water last.
• Do not use soap or detergent for the cabinet.
• Clean the cellar regularly.
Problem
No cooling
Operation

Cleaning and Care

Troubleshooting

Possible Cause
Plug not put in
Low voltage
Fuse broken
Solution
Put in the plug
Ensure normal voltage
Change fuse
8

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis