JOBOBIKE SAM Bedienungsanleitung Seite 9

Step 4 Unfold the stem
Lift the stem up and lock it with the folding clasp, then fix
the folding clasp with the plastic buckle.
Step 5 Adjust the angle of handlebar
Adjust the handlebar to a proper angle and fix the screws
with a wrench 5# hexagon. Make sure the two screws are
fixed tightly.
Step 6 Adjust the saddle height
Move the saddle up or down to your desired saddle height.
Do not raise the saddle post exceeding the minimum
insertion mark on the saddle post tube. Close the quick
release lever and make sure the lever is tighten enough
when locking the saddle post.
9