HBM CANHEADdirect Kurzanleitung Seite 6

6
2.1.1 Installing the driver for the CANHEADdirect interface
• First install the catmanEASY/AP 3.0 software
The driver for the CANHEADdirect module is installed automatically. The
PCAN network is set up automatically.
• Alternatively, you can install the driver from the accompanying system CD
(setup.exe)
For manual installation, please proceed as follows:
Prompt for the installation of the driver when the CANHEADdirect module is
connected to the PC USB port.
HBM
CANHEADdirect
A2574−1.1 en/de