HBM CANHEADdirect Kurzanleitung Seite 17

CANHEADdirect
Information for users who do not use catmanEASY/AP 3.0
1. Connect the system as described in chapter 2.1
2. Start the Setup.Exe file
The driver for the CANHEADdirect interface is installed automatically.
The PCAN network is automatically configured.
The PCAN programs are automatically installed.
The SystemCheck program is automatically installed.
3. Manually install the driver for the CANHEADdirect interface from the
system CD. Proceed as described in chapter 2.1.1 and enter the path of
the system CD (setup.exe)
4. Check the system function with the SystemCheck program (see Chapter
2.1.3)
The sample program CANHEADdirect "SystemCheck" is automatically
installed when setup.exe is started and can be found in the
CANHEADdirect program directory.
5. Integrate CANHEADdirect via API (DLL) or ActiveX API in the system
The documentation for API or ActiveX API is on the system CD (with an
example for integration, API sub−directory).
A2574−1.1 en
17
HBM