HBM CANHEADdirect Kurzanleitung Seite 5

CANHEADdirect
2. Starting up: First steps
2.1 Connecting and setting up the system
• Connect the CANHEAD modules with each other:
M12 DeviceNet cable (e.g. 1−KAB267−2) plus one termination resistor
(1−CANHEAD−TERM)
• Connect a CANHEAD module with the CANHEADdirect module:
M12 DeviceNet cable 1−KAB267−2
CAUTION
The CA1030 amplifier module requires hardware version 1.30 or
higher.
• Connect the CANHEADdirect module to your PC
• Supply the CANHEADdirect module with voltage
Power pack NTX001 (10V − 30 V DC)
CANHEAD measuring point: E.g. SG
A2574−1.1 en
Max. 5 CANHEAD modules
CANHEADdirect
Terminal resistor
NTX001
5
Mains
HBM