Endress+Hauser eco-graph Betriebsanleitung Seite 62

6. Fault finding, repair and maintenance
6.5.3 Spare parts structure for
the CPU/analogue inputs
6.6 Accessories
6.7 Disposal
6.8 Programme/software
update using programme
diskette at the unit
60
Input signals
3 Version with 3 analogue inputs (incl. terminals)
6 Version with 6 analogue inputs (incl. terminals)
Internal memory / recording length
A Memory for max. 256000 measured values
B Memory for max. 512000 measured values
Operating language
A
B
C
D
E
F
G
H
K
RSG20X1-
Pos
RS232 interface cable for connection to PC
RS232 interface cable for connection to modem
A Power supply terminal strip, 3 pole
B Relay terminal strip, 3 pole
C Analogue input terminal strip, 5 pole
D Digital input terminal strip, 6 pole
Please take the local legal requirements into consideration.
1. Save the unit set up to a new diskette ("Diskette functions / Save set up to
diskette").
2. Switch the unit off.
3. Place the new original programme diskette in the unit drive.
4. When switching the unit on hold the two push buttons "ò" and "E" in
simultaneously until the green LED flashes.
5. Release the push buttons, the new programme will now be loaded (time required
approx. 5 minutes). The screen is darkened during this process, the green LED
flashes. Acknowledge the RESET message with OK.
6. If required load the already saved unit setting back into the unit ("Diskette functions
/ Load set up from diskette").
Attention:
All data stored in unit memory as well as diskette are deleted on a programme
update.
Operating language: German
Operating language: English
Operating language: French
Operating language: Italian
Operating language: Spanish
Operating language: Dutch
Operating language: Danish
Operating language: American
Operating language: Czech
Model
A Standard
- Order code
Part Mat.-Number
RSG20A-S1
RSG20A-S2
50078843
50083642
51001351
51000719