Oase Filtral UVC 1500 Gebrauchsanleitung Seite 25

Assembly
Operation with water feature
When operating together with a water feature, the device should be set up horizontally.
The branch valve is mounted together with the nozzle pipe and nozzle insert at the device's out-
put.
• Depending on the nozzle insert used, a specific water feature is created.
Connection to the second output of the branch valve:
• Hose connection for a watercourse/water feature.
• Filtral 1500: Operation is possible either with the fountain or with the optionally available Ven-
turi nozzle.
• Filtral 3000/6000/9000: When using the Venturi nozzle, run the air hose along the nozzle
pipe and secure in the holder on the nozzle connection. The air hose must be able to suck in
air, no water may be allowed to enter the air hose.
Hand-tighten the bolt connections.
Filtral UVC 1500 Filtral UVC 3000, 6000, 9000
FTL0026
EN
FTL0034
25