Oase Filtral UVC 1500 Gebrauchsanleitung Seite 27

Installation
Set up the device horizontally
Observe the following conditions:
• Ensure that the connection to the power supply is at least 2 m from the edge of the pond.
• Place the device so that the filter housing is always below the water level.
• Position the device so that the nozzle insert is above the water level.
• Place the unit in the pond on horizontal, firm and sludge-free ground.
Hang up the device
Observe the following conditions:
• Ensure that the connection to the power supply is at least 2 m from the edge of the pond.
• Place the device so that the filter housing is always below the water level.
• Only operate the device without water feature.
• Screw the two screws into the filter base and hang the device on the two screws with a cord.
Fasten the cord on the side of the pond.
EN
FTL0036
FTL0039
27