Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• Take the warm parts of your appliance from your face and neck and
do not touch them. Keep only from the handles and related buttons.
• NEVER leave your appliance on the textile products which are not
resistant to high temperature or hot surfaces when it is hot or in
operation.
• ALWAYS unplug your appliance after using.
• After using your appliance wait for your appliance and the related
accessories to cool down completely before removal.
WARNING:
1- NEVER use your hairdryer when in the bath, shower or
in the areas in contact with water and when your hands
are wet.
2- Use your appliance only holding the handle part. When
it is in use, air outlet part, nozzle, etc. may be hot.
3- When you do not use your appliance, ALWAYS set the button off
position for closing and unplug your appliance. If closing water while
your appliance is off but plug, it will cause a danger.
4- After using your appliance, the nozzle may be hot, so ALWAYS allow
your appliance cooling down then you can take the nozzle off.
SUGGESTIONS FOR USE
• You can dry your hair quickly and can create the different hair models
easily with your hairdryer.
• We recommend you to use a round cover comb to make your smooth
hair filled or shape them wavy and to use a smooth cover comb to make
them smoother. Make sure in both processes that the hot air goes
inside your hair from the bottom points to the tips.
• If you give filling effect to the bottom points of your hair, start it by
combing bottom points of your hair in opposite direction to the combing
direction required for your desired model.
• Your hairdryer is equipped with a 3-stage temperature setting and a
2-stage air speed setting. These switches allow you to set the desired
temperature and air power.
• Thanks to a safety cut-off device available in your Arzum. Hairdryer,
this unit is automatically protected with a thermal system, against
overheating that may occur for any reason whatsoever.
16
ARZUM
• Your appliance needs to be left in a cold environment for 1 to 2
minutes and thermal protection will return to its original position
automatically.
SETTING SELECTIONS
SPEED/FAN SETTING
0 Off
1 Slow Drying
2 Quick Drying
TEMPERATURE SETTING
1 Low Temperature Level
2 Medium Temperature Level
3 High Temperature Level
COOL SHOT BUTTON
• By pressing on the cool shot button, the
cold air is given. After give up pressing the
button, your appliance continues to give air
which adjusting before. You can always use
for cooling the heat in your hairs, switched on
at any setting.
• If you give little cold air to your hair after
every hair model you apply, your hair model
will stay longer.
FORM NOZZLE
(Airflow Concentrator)
• Use the form nozzle which
concentrates the airflow and so your hair
is dried easily and quick. Use the form
nozzle of your hairdryer to route the hot
air to the direction which you want them
to contact completely.
WARNING: Do not allow your appliance
to get much closer to your hair not to lose the natural moisture of your
hair.
EN
ARZUM
17
Werbung
