Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Before connecting the hob to the mains power supply, check that:
1.
The domestic wiring system is suitable for the power drawn by the
hob.
2.
The voltage corresponds to the value given in the rating plate.
3.
The power supply cable sections can withstand the load specified on
the rating plate.
4.
The installation is fitted with an efficient earthing connection in line
with current regulations and law. The earth connection is a legal
requirement.
-
To connect the hob to the mains power supply, do not use adapters, reducers, or
branching devices, as they can cause overheating and fire.
-
Where the appliance is not supplied with a cable or plug, use suitable material for
the current indicated on the rating plate and for the operating temperature. The
cable must never reach a temperature of more than 50 °C above the ambient
temperature.
-
The power supply should be connected in compliance with the relevant standard,
or a single-pole circuit breaker.
•
The installer must ensure that the correct electrical connection has been made and
that it is compliant with safety regulations.
•
The cable must not be bent or compressed.
Werbung
