Delivery Set; Technical Specifications; Recycling - Rondell Rde-1113 Die Betriebsanweisung

Malfunction Possible reason
The display shows the icon The water tank is empty
«Water tank»
The brewed coffee is too The grind is too fine
weak
Dark roasted coffee is used for
preparing drinks, which releases
more coffee oil, the grinder knives
become sticky, the beans do not
enter the coffee machine
Wet coffee has blocked the coffee
maker operation
Coffee is not poured into The water tank is installed im-
the cup properly
The filter on the piston of the brew-
ing unit (12) is clogged
Water supply pipes for making
coffee are blocked
STORAGE
– Before taking the unit away for storage, unplug it and
let the unit cool down completely.
– Clean the unit.
– Do not leave, use and keep the unit in places with the
temperature below 0°C.
– Keep the unit in a dry cool place out of reach of chil-
dren and handicapped persons.
TRANSPORTATION
– Keep the original packaging of the coffee machine
for safe transportation.
– Remove all water from the water tank (4) of the cof-
fee machine and its internal parts, wipe dry with a
soft cloth.

DELIVERY SET

Coffee Machine – 1 pc.
Milk supply tube – 2 pc.
Stainless steel platform for heating cups – 1 pc.
Measuring spoon for coffee – 1 pc.
Metal brush for cleaning the milk supply system – 1 pc.
Solution
Fill the water tank with clean water and install it into the
socket behind the left door of the coffee maker and press
until clicking
Adjust the grinding by setting it to less fine grind
During the coffee maker operation turn the control knob
to the direction of «+». If the problem remains, contact the
service center.
Remove wet coffee beans, clean the coffee bean contain-
er and add dry coffee beans
Fill the water tank and place it in the socket behind the
coffee machine left door, press on it until bumping
Clean the brewing unit following the guide, thoroughly
clean the filter on the brewing unit piston or apply to the
service center.
Perform the decalcination following this guide. If the
problem remains, contact the service center.
Soft brush for cleaning the brewing unit – 1 pc.
A set of spare silicone rings for the brewing unit – 1 pc.
Plug for milk system inlet – 2 pc.
Instructions with warranty card – 1 pc.

TECHNICAL SPECIFICATIONS

Power supply: 220-240 V ~ 50-60 Hz
Rated input power: 1300-1500 W
Water tank capacity: 1,6 L

RECYCLING

For environment protection do not throw out the unit and
the batteries (if included), do not discard the unit and the
batteries with usual household waste after the service life
expiration; apply to specialized centers for further recycling.
The waste generated during the disposal of the unit is
subject to mandatory collection and consequent dis-
posal in the prescribed manner.
37