10. Replace the mattress ensuring that both the Bedstick handles are pointing
upwards and that they are in the optimum position to suit the client's needs.
Figure 1
Figure 2
Figure 3
Figure 4
CLEANING
A useful guide to decontamination is MHRA leaflet DB2003(06).
Do not use abrasive cleaners as this could damage the surface of the equipment. For
cleaning, wipe with a clean cloth soaked in detergent solution and wring out. Depending on
the detergent manufacturer's instructions the solution may be heated.
Wipe all surfaces of the equipment and the cloth should be re-immersed periodically and the
detergent changed frequently. The detergent should be rinsed or wiped off using a clean
cloth immersed in clean water and wrung out.
To disinfect make sure the equipment has been cleaned and dried and then wipe over with a
clean cloth and a compatible liquid disinfectant. After disinfecting clean with clean water
and dry.
When using detergent or disinfectants then please refer to manufacturers' instructions and if
unsure then consult your local Infection Control Specialist for advice.
o
This equipment can be cleaned/disinfected by moist heat at 80
C for a minimum of 1 minute
o
or autoclaved at 80
C for at least 1 minute. After cleaning or disinfecting treat all joints with a
water dispersing agent, e.g. WD40.
Fixing and Maintenance Instructions
Ver.7 10/2013 (1693)
3