Werbung
Verfügbare Sprachen
Verfügbare Sprachen
view is 60°. Each of the side sensors has a 30° angle of view,
which is only used to pre-activate the camera and
accelerate the triggering speed, there is no RED light
blinking whatever each of the side sensors detects motions.)
In these sensing tests, the camera will take pictures once
motion is captured. When you open the camera, the screen
shows the number of times triggered, you can review the
pictures on the screen.
The results of your testing will help you find the best
placement when mounting and aiming the camera. The height
above from the ground for placement of the device should vary
with the size of animal you are hoping to see. In general, 3 to 6
feet is preferred.
You can avoid potential false triggers due to temperature and
motion disturbances in front of the camera by not aiming it at a
heat source or nearby tree branches or bush (especially on
windy days).
Do NOT install the camera behind the glass window as that is
not possible to sense any motion. Avoid aiming the camera
toward to any glass objects.
9.3. Starting
The camera supports three working modes, "Motion Detection",
"Time Lapse" and "Hybrid", press START button to enter
surveillance mode.
(1) If you set the camera's working mode as "Motion
detection" in the menu, the camera will count down a
30-second delay, and then will be ready to go into standby
(surveillance) and capture. Any motion that is detected by it
will trigger the capture of an image or video as programmed in
the menu. Be sure you have read the descriptions of the
25
Werbung
