GardePro X60P Bedienungsanleitung Seite 28

9.2. Sensing Angle and Distance Test
In order to test whether the camera can effectively monitor the
area you choose, this test is recommended to check the sensing
angle and monitoring distance of the camera. To perform the
test:
Switch the camera to the ON mode.

Press MENU button, go to "Motion Test". The camera will

count down a max 60-second delay and be ready to capture
motion. (Note: The delay time may be less than 60 seconds,
depending on the actual time of the motion sensor to be
activated. The delay time is 60 seconds minus the power-on
time.)
Close the camera door.

Make movements in front of the camera at several positions

within the area where you expect the game or subjects to be.
Try different distances and angles from the camera.
When the white motion indicator LED flashes in RED, it

indicates that the camera is able to sense the position.
However, if the LED doesn't blink, it means that the
position lies beyond the sensing range. (Note: The red light
will blink only when the motion is within the sensing area of
the central PIR sensor. The central sensor's sensing angle of
Figure 12: Mounting the Camera
24