Werbung
Verfügbare Sprachen
Verfügbare Sprachen
the screen is off, the camera enters standby and will perform
according to your settings.
App & Cellular Connection:
You can use the app to connect the camera when the camera is
operating in the ON or SURVEILLANCE mode.
6.1. OFF Mode
The OFF mode is the "safe" mode when any actions must be
taken, e.g., replacing the SD card or battery, or transporting the
device. And of course, when you are storing or not using the
camera, you will switch it to OFF. Please note that in the OFF
mode the camera still consumes a little power. It's a good idea
to take the battery out of the battery compartment if the camera
will not be used for a long time.
6.2. ON Mode
In the ON mode you can check and change the settings of the
camera with the help of its built-in screen. These settings,
found in the menu by pressing MENU key, let you change the
photo or video resolution, interval between photos, switch the
time imprint on, etc. (See more in Section 8 ADVANCED
SETTINGS).
On the screen display, you will see an information screen that
shows how many images have been taken, the battery level,
camera or video mode, etc.
Attention please: In the ON mode, the camera will
automatically enter SURVEILLANCE mode if there is no
operation (key pressing) within 3 minutes. Then the camera
will perform as your settings in the menu.
9
Werbung
