Werbung
Verfügbare Sprachen
Verfügbare Sprachen
In the ON mode, you can connect the camera to a computer's
USB port to download your images.
6.3. SURVEILLANCE Mode
Any time after the battery and SD card have been inserted, you
can switch on the camera. When the START button is pressed,
the camera will enter into the SURVEILLANCE mode. If the
Mode in the settings is set as "Motion Detection", the camera
will count down a 30-second delay and then be ready to
capture images. If the Mode is set as "Time Lapse", there will
be no 30-second counting down, and the camera will be ready
to enter Time Lapse.
Once in the SURVEILLANCE mode, no manual controls are
needed or possible (the control keys have no effect). The
camera will take photos or videos automatically (according to
its current parameter settings).
TIP: You can press the START button again to wake up the
camera and reprogram your camera if required.
7. CELLULAR CONNECTION
7.1. Download GardePro Mobile App
Before using the cellular functionality, please download the
"GardePro Mobile" app.
NOTES:
The screenshots shown in this section are indicative only. The
actual diagram on different versions of app, iOS and Android
10
Werbung
