Herunterladen Inhalt Inhalt Diese Seite drucken

Regler Programmieren; Program The Esc - Amewi AMX SWIFT 2100 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

After power on, motor does not work such
an alert tone is emitted:
"beep-, beep-, beep-" (Every "beep-" had a
time interval of about 2 second).
Nach dem Einschalten funktioniert der
Motor nicht, so dass ein Warnton
ausgegeben wird:
"piep-, piep-, piep-" (Jeder "Piep-Ton" hat
ein Zeitintervall von etwa 0,25 Sekunde).
After power on, motor does not work such
an alert tone is emitted:
"beep-, beep-, beep-" (Every "beep-" had a
time interval of about 0,25 second).
Nach dem Einschalten funktioniert der
Motor nicht, ein spezieller Ton "56712"
wird nach 2 Pieptönen (Piep-Piep)
ausgegeben.
After power on, motor does not work, a
special tone "56712" is emitted after 2
beep tone (beep-beep-)
Der Motor dreht in die falsche Richtung.
The motor runs in the opposite direction.

REGLER PROGRAMMIEREN /

Hinweis: Bitte stellen Sie sicher, dass die Gaskurve auf 0 gestellt ist, wenn sich der Gashebel in der untersten Position befindet und
bei 100, wenn er ganz nach oben gedrückt wird.
Note: Please ensure that the throttle curve is set to 0 when the throttle stick is in the lowest position and at 100 when it is pushed
to top.
amewi.com
Throttle signal is irregular.
Der Gashebel befindet sich nicht in der
untersten Position.
The throttle stick is not in the lowest
position.
Die Richtung des Gaskanals ist umgekehrt, so
dass der Regler in den Programmiermodus
übergegangen ist.
Direction of the throttle channel is reversed,
so the ESC has entered the program mode.
Die Kabel vom Regler zum Motor müssen
getauscht werden.
The connection between ESC and motor needs
to be changed.

PROGRAM THE ESC

BEDIENUNGSANLEITUNG / INSTRUCTION MANUAL SWIFT 2100
Check the receiver and Transmitter.
Check the cable of throttle channel.
Bewegen Sie den Gashebel in die unterste
Position.
Move the throttle stick to the bottom position.
Stellen Sie die Richtung des Gaskanals korrekt
ein.
Set the direction of throttle channel correctly.
Vertauschen Sie zwei beliebige
Kabelverbindungen zwischen ESC und Motor.
Swap any two wire connections between ESC
and motor.
23

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

24135Amx planes swift 2100

Inhaltsverzeichnis