Fox 40 Bedienungsanleitung Seite 2

sag setting
To achieve the best performance from your
FOX suspension, adjust the air pressure to attain
your proper sag setting. Sag is the amount your
suspension compresses under your weight and
riding gear. Sag range should be set to 15–20%
of total fork travel.
Make sure to set sag with the LSC adjuster in
the full counter-clockwise (OPEN) position,
see page 5-6.
Watch the sag setup video at ridefox.com/sagsetup
For complete installation details and safety
warnings please see your FOX Fork Owner's Guide.
Suggested Sag Measurements
Travel 15% sag (Firm) 20% sag (Plush)
203 mm (8in) 30 mm (1.2in) 41 mm (1.6in)
190 mm (7.5in) 28.5 mm (1.1in) 38 mm (1.5in)
Your fork has a 4 digit ID code on the back of the lower leg. Use this number on the Help page
.
at www.ridefox.com to find out more information about your fork
2