Caberg DRIFT EVO II Bedienungsanleitung Seite 8

ENG
1. HOW TO REMOVE/ INSTALL THE CLEAR VISOR
To remove the visor:
1.1 Fully open the visor.
1.2 Raise lever A and then release the visor. (Pic.1)
1.3 Repeat the operation on the other side in ordert o remove completely
the visor.
To install the visor:
1.4 To re-install the clear visor, place the pivot B on the visor mechanism
and slide it until it is hooked. (Pic.2)
1.5 Repeat the same process on the other side and remove completely
the visor.
2. HOW REMOVE THE SUN SHIELD
2.1 Drive the lever A of the sun shield downwards.
2.2 Release the sun shield by pulling slightly outward. (Pic.3)
3. HOW TO INSTALL THE SUN SHIELD
3.1 Drive the lever A of the sun shield downwards.
3.2 Insert and clip the sun shield accommodating its side parts into
their seating slightly pressing. (Pic.4)
WARNINGS! Do not use the sun shield during late night hours or in scarce
visibility condition.
8