Function Open/Close Programming Remote Control - cherubini RX MINI Einstellanleitungen

REMOTE CONTROL SKIPPER PLUS - SKIPPER LUX - SKIPPER P-LUX
REMOTE CONTROL POP PLUS - POP LUX - POP P-LUX
To prevent accidental changes to the programming of the motor during the daily use of
the remote control, the possibility of programming is disabled automatically 8 hours after
sending the last sequence (A+B or B+C).
CHECKING THE STATUS OF THE FUNCTION
Tn
+ +
A B C
To change the status of the function, see the sequences "ENABLE/DISABLE
PROGRAMMING".
ENABLE PROGRAMMING
OPTION 1
Tn
+ +
A B C
OPTION 2
Proceed with programming as the instructions booklet.
DISABLE PROGRAMMING
Tn
+ +
A B
C
FUNCTION OPEN/CLOSE PROGRAMMING
3 sec
3 sec
3 sec
Open
programming
Closed
programming
A
Closed
OPTION 2
Open
C
24
or after
B
30 sec.
or after
B
30 sec.
Remove and replace
a battery
or after
B
30 sec.