Connecting The Glasstron; Connecting Video Equipment - Sony Glasstron PLM-A35E Bedienungsanleitung

Connecting the Glasstron

Connecting video equipment

Connect a VCR, laser disc player, DVD player, or camcorder to the power supply box as shown
below. Two AV cables are supplied. Select the correct AV cable according to the shape of the
connectors on the unit to be connected.
Power supply box
A/V IN
to A/V IN
(special minijack)
: Signal flow
About the audio/video input jack
The audio/video input jack of the Glasstron is a
special minijack, and the signal connections are
aligned as shown on the right. This alignment
may differ depending on the equipment.
8
-GB
VCR, laser disc player, DVD player, camcorder, etc.
to audio/video outputs
(phono jack)
Video
(yellow)
Audio/video cable
(special miniplug y phono
plug) (supplied)
Audio/video cable (special
miniplug y stereo miniplug)
(supplied)
Audio L
Audio L
(white)
to video output
(minijack)
Video (yellow)
Audio (black)
to audio output
(stereo minijack)
Audio R
GND
Video
Audio R
(red)
DVD player,
Video CD
player