3L STAR WELD TEC-800 Montageanleitung Seite 4

EN
• ADJUSTING VIEW ANGLE POSITION
Please see fig.2.
• SELECTING THE OPERATING MODE
Use the switch button on the back of shade cartridge to select the mode appropriate for the work activity.
Weld mode - Used for most welding applications. In this mode the shade function is turned on when it optically senses
ES
a welding arc. Select shade level, delay time and sensitivity as required (see fig.3).
Grind Mode - Used for metal grinding applications. In this mode, the shade function turned off. The shade is fixed shade
DIN 3.5 that allowing a clear view to grind a weld with the helmet providing face protection (see fig.3).
• SELECTING SHADE LEVEL
Select the shade level you require according to the welding process you will use by referring to the "Shade Guide Table"
DE
below for settings. Turn the shade control knob on the side of the helmet to the shade number required.
FR
GR
SMAW – Shielded Metal Arc Welding
MIG (Heavy) – MIG on Heavy Metals
TIG, GTAW – Gas Tungsten Arc Welding
PAW – Plasma Arc Welding
PAC – Plasma Arc Cutting
PL
MAG/CO2 - Metal Active Gas
SAW – Shielded Semi-Automatic Arc Welding
MIG (Light) – MIG on Light Alloys
• SELECTING DELAY TIME
PT
When welding ceases, the viewing window automatically changes from dark back to light but with a pre-set delay to
compensate for any bright afterglow on the workpiece. The delay time / response can be set to " S " (short: 0.1 sec.) or
" L " (long: 1.0 sec.). As you require using the infinitely dial knob on the back of the shade cartridge (See fig.3a). It is
recommended to use a shorter delay with spot welding applications and a long delay with applications using higher
currents. Longer delays can also be used for lower current TIG welding, and TIG / MIG / MAG pulse.
RO
4