Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Ermenrich Ping ES20 Wall Pipe Blockage Detector
EN
Please carefully read the safety instructions and the user manual before using this product. Keep away from children. Use the
device only as specified in the user manual.
The kit includes: transmitter, receiver, dual Type-C USB-cable, earbuds, sensor repair accessories, 502 glue, user manual, and warranty.
Charging the device
The transmitter and the receiver use rechargeable built-in lithium batteries. Connect the dual Type-C USB cable (included) to the transmitter
and to the receiver and the DC adapter (not included) via a USB port and connect it to the AC power supply to charge the devices. Fully charge
the device before the first use.
Usage
Press (1) and hold it for 2s in order to turn the transmitter on. Turn the knob (4) of the receiver clockwise.
Put the sensor in the pipe. Pull the cable out using the rotation wheel until the sensor stops due to a blockage in the pipe.
Turn the knob (4) to the maximum sensitivity and track the pipe with the receiver. The strongest signal will be in the blockage area. To detect
the blockage more accurately, lower the sensitivity.
Warning! Do not pull the cable with your hands as it may cause damage.
Transmitter
Pipe
Sensor
The device may cause noise interference when it is located near electric wires, electronic devices, etc. When detecting metal pipes,
the detection distance may be reduced down to 150–200mm due to electromagnetic shielding. Set the device aside before digging
the blockage.
Pre-operation check
Turn the transmitter on and take the cable out using the rotation wheel. One short sound means a short circuit. Two short sounds mean that it
is in the normal state. One long sound means that the device is entering operation mode.
Turn the knob (4) to the maximum and place the receiver near the transmitter sensor. If the receiver emits a strong signal, the device is ready.
If not, repair the sensor.
Sensor repair
1
2
3
Receiver
Sensor repair accessories
1
502 glue
2
Large heat-shrinkable tube
3
Protective cover
4
5
4
Small heat-shrinkable tubes
5
Thin copper tubes
6
6
Sensor
Correct
3
Wrong
Werbung
