Product Description And Specifications - Bosch PHO 2000 Originalbetriebsanleitung

Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for planing of firmly supported
wooden materials, such as beams and boards. It is also suita-
ble for beveling edges and rebating.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Chip ejector (PHO 2000: alternatively right/left)
2 Depth adjustment knob (insulated gripping surface)
3 Planing depth scale
4 Chip ejection selector lever (PHO 2000)
5 Lock-off button for On/Off switch
6 On/Off switch
7 Storage compartment
Technical Data
Planer
Article number
Rated power input
Output power
No-load speed
Planing depth
Rebating depth
Planing width, max.
Weight according to EPTA-Procedure 01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-14.
Typically the A-weighted noise levels of the product are:
Sound pressure level 86 dB(A); Sound power level 97 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
2 2
a =4.5 m/s , K=1.5 m/s .
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
Bosch Power Tools
8 V-grooves
9 Planer base plate
10 Handle (insulated gripping surface)
11 Blade drum
12 Clamping element for blade
13 Fastening screw for planer blade
14 Carbide blade (TC)
15 Hex key
16 Extraction hose (Ø 35 mm)*
17 Chip/dust bag*
18 Parallel guide*
19 Scale for rebating width*
20 Locking nut for adjustment of rebating width*
21 Fastening bolt for parallel and beveling guide*
22 Angle stop*
23 Locking nut for angle adjustment*
25 Fastening bolt for rebating depth stop*
24 Rebating depth stop*
26 Park rest
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
PHO 1500
3 603 BA4 0..
W
W
-1
min
mm
mm
mm
kg
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
English | 13
PHO 2000
3 603 BA4 1..
550
280
19500
0 – 1.5
0 – 8
82
2.4
/II
1 619 P12 023 | (24.6.14)
680
400
19500
0 – 2.0
0 – 8
82
2.4
/II