Herunterladen Diese Seite drucken

Klugmann KSO600LCD Bedienungsanleitung Seite 20

Dampfbackofen

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

&warning
7. When operating in modes with steam, DO NOT stand near the heat vent; when
opening the oven door, be cautious of hot steam in order to avoid burns.
8. Power connection to this product must be equipped with an air switch or leakage
protection switch that meets the electrical parameters marked on the product
nameplate before it can be connected and used.
9. DO NOT put heavy objects on top of the power cord to avoid accidents.
10. Please keep the product and power cord away from heat-generating objects,
flammable and explosive materials, to avoid product damage or fire or explosion
hazards.
11. lf the power cord is damaged, in order to avoid danger, it must be replaced by
professionals from the manufacturer's maintenance department or similar qualified
technicians.
12. Please use suitable steaming trays and containers to avoid spilling oil droplets
and causing a fire.
13. Please place the cooking container on the shelf correctly, DO NOT place directly
on the bottom of the oven cavity to avoid accidents.
14. The oven door surface behind the door handle will get hot, be careful to avoid
getting burnt.
15. After cooking, the temperature around the oven cavity is still hot, please wait for
the cavity to cool down before cleaning to avoid getting burnt.
16. Children being supervised not to play with the appliance.
17. This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved.
18. Cleaning and user maintenance shall not be made by children without supervision.
19. Children less than 8 years of age shall be kept away unless continuously supervised.
&Attention
1. Do not use the product door to hang heavy objects, or lean against or sit on the
product door to avoid damaging the product.
2. Please do not tauch the product or plug/unplug the power plug with wet hands,
or when feet are wet or barefooted to avoid electric shock.
3. DO NOT use harsh abrasive cleaners or sharp meta[ scrapers to clean the oven door
glass, as it may scratch the surface and result in shattering of the glass.
4. This product must be placed on a sturdy and level surface. DO NOT install the product
under plastic lighting equipment or plastic rack to avoid deformation or explosion
hazard.
03
&Attention
5. Handle the product with care, and lift from the bottom of the product when
transporting and placing it; DO NOT use the oven door handle as a supporting
point for transport to avoid damage due to excessive force.
6. DO NOT use steam cleaner to clean this product.
7. To prevent possible hazards, the control panel of the product can only be connected
to the specified heating element.
Product structure diagram
The folowing product model structure diagram is a general simple structure
diagram,only for users to identify the location of parts, if the graphics do not match
the actual object, please refer to the actual object.
Enamel pan
Steam pan
______ Water tank
- - - - - - - Control panel
- - - - - Glass door
- - - - - Handle
Wire rack
04

Werbung

loading