Gigabyte Sabre 15 Bedienungsanleitung Seite 25

6
Smart USB Backup Guide
● You can backup original recovery image through this application in case of losing by device damage.
● You can backup original recovery image to USB disk and restore the system if any storage system
replacement with the recovery USB disk.
● Before you restore the system through the recovery USB disk, please make sure that you have already
made the backup of your data.
● Please DO NOT shut down or un-plug the system when performing backup through recovery USB disk.
1
2
3
4
5
• The window will pop out when the creation of recovery disk is done.
• Please press F12 on starting the system when you need to restore the system. Select
"boot from recovery USB disk" and the system will be restored."
• The time needed for restore will be around 30 mins(time needed may vary by USB disk
model) .
(Original: Recovery Image USB)
WARNING
• Please plug in the USB disk which is
at least 20GB in capacity to make the
original image (backup the data in USB
>20G
first. All data will be eliminated during
the creation of recovery USB disk)
• Insert the driver disk to your optical
drive and run the install of " Smart USB
Backup" (for none-ODD model, please
use USB ODD device or download
from http://www.gigabyte.com
• Run the "Smart USB Backup" after
finishing the install.
• Select your USB disk from the drop-
down list and start to create the
recovery USB disk.