FIMAR FME-Serie Benutz Und Wartungsanleitung Seite 66

Heat power adjustment to mini-
mum
METHANE GAS powered appli-
ance
1 - Remove the knob (G).
2 - Loosen the screw (H) (about 2/
3 turn) and assemble the knob
(G).
3 - Turn on the burner , rotate the
knob to the minimum power po-
sition.
4 - Pull out the knob (G) and tight-
en the screw (H) until the flame
is stable.
5 - Assemble the burner control
EN
knob and rotate it to turn it off.
6 - Repeat minimum adjustment on
the other burner (G1).
LIQUID PROPANE GAS powered
appliance (LPG)
1 - Pull out the knobs (G-G1).
2 - Fully tighten the minimum adjustment screw (H).
3 - Assemble the knobs (G-G1).
4 - Turn on the appliance and make sure the flame is stable.
5 - Turning off the appliance
G
G1
- 30 -
PIZZA OVENS
(GAS POWERED)
H
H
IDM-34601501100.tif
English language