FIMAR FME-Serie Benutz Und Wartungsanleitung Seite 64

Burner nozzle replacement
1 - Loosen the screws and remove
the front panel.
2 - Loosen the screws (A) and re-
move the air register brackets
(B).
3 - Unscrew the top (C) and bottom
(D) burner nozzles and replace
them with ones suitable to the
gas type used.
4 - Unscrew the multi-burner igni-
tion nozzle (E) and replace it
with the one suited for the gas
used.
Pilot flame nozzle replacement
EN
Unscrew the
replace it with the one suited for
the gas used.
Primary burner air adjustment
1 - Assemble the air register brackets (B) without tightening the screws (A).
2 - Slide the air register brackets to adjust slot dimension (see table data).
3 - Tighten the screws (A).
4 - Reassemble the front panel and secure it with the screws.
nozzle (F) and
E
C D
A
- 28 -
PIZZA OVENS
(GAS POWERED)
F
D C
B
IDM-34601501000.tif
English language