cecotec CONGA WET&DRY T Bedienungsanleitung Seite 33

- Accessory for upholstery
- Accessory for liquids
- Instruction manual
3. PRODUCT ASSEMBLY
Attach the wheels to the base.
Fig. 2
Connect the flexible hose to the vacuum cleaner. Insert the flexible hose into the suction
channel and turn it clockwise.
Fig. 3
- Connect the two plastic tubes.
- Connect the tubes to the flexible hose handle.
- Connect the end of the plastic tube to the accessories.
Add water up to the maximum level. Do not exceed the maximum or the water will run out.
Fig. 4
Filter
- Turn the water tank cover counterclockwise to access the filter.
- To remove the filter, turn it counterclockwise.
- The filter must be cleaned regularly to maintain suction power. After removing the filter,
clean it with lukewarm water and no detergents. When the filter is completely dry, relocate
it and secure it by turning it clockwise.
Fig. 5
- Fit the water tank cover.
- Put the cover in place and turn it clockwise to close it.
Fig. 6
Closing tabs
Put the head in place and use the tabs to secure it.
Fig. 7
Blow function
Insert the flexible hose into the blowing channel and turn it clockwise to fix it.
Fig. 8
ENGLISH
CONGA WET&DRY T
33