Inserting, Removing The Sd Card; Note To Owners Of Progressive Compatible Pal System Televisions - Panasonic DMR-EH60 Bedienungsanleitung

Inserting, Removing the SD card

Only insert or remove the SD card after turning the unit off.
When the card indicator ("SD") on the unit's display is flashing, the card is being read from or written to. Do not turn off the unit or remove the card.
Such action may result in malfunction or loss of the card's contents.
Opening the cover
Press down.
≥You can use SD Memory Cards with capacities from 8 MB to 1 GB (➡ 11).

Note to owners of progressive compatible PAL system televisions

≥If you have an LCD/plasma television or LCD projector
Using progressive output, you can enjoy high-resolution video
recorded on media such as DVD-Video. Connect this unit's
component video output terminals to your television and turn on the
progressive output setting (➡ 16, 20).
RQT8203
6
6
Inserting the card
Press on the centre of the
If you are using a
card until it clicks into
miniSD
place.
into the miniSD
adaptor that comes
with the card.
Insert and remove this
adaptor from the unit.
Insert the card label up with
the cut-off corner on the right.
(Do not forget to close the cover. ➡ right)
COMPONENT
VIDEO IN
Progressive output
COMPONENT
VIDEO OUT
Removing the card
Press on the centre of
1
the card.
TM
card, insert it
Pull it straight out.
2
TM card
ADAPTER
≥If you have a regular television (CRT: cathode ray tube)
Use component output with progressive "Off" (Factory setting ➡ 57),
even if it is progressive compatible, because progressive output can
cause some flickering. This is the same for multi system televisions
using PAL mode.
Closing the cover
Push up.
COMPONENT
VIDEO IN
Progressive output
COMPONENT
VIDEO OUT