Television Operation - Panasonic DMR-EH60 Bedienungsanleitung

Television operation

You can configure the remote control TV operation buttons to turn
the television on/off, change the television input mode, select the
television channel and change the television volume.
1
Point the remote control at the television
While pressing [Í TV], enter the
code with the numbered buttons.
[0] ➡ [1]
e.g., 01:
Manufacturer and Code No.
Brand Code
Panasonic 01/02/03/04/
45
AIWA 35
AKAI 27/30
BLAUPUNKT 09
BRANDT 10/15
BUSH 05/06
CURTIS 31
DESMET 05/31/33
DUAL 05/06
ELEMIS 31
FERGUSON 10
GOLDSTAR/LG 31
GOODMANS 05/06/31
GRUNDIG 09
HITACHI 22/23/31/40/
41/42
INNO HIT 34
IRRADIO 30
ITT 25
JVC 17/39
LOEWE 07
METZ 28/31
MITSUBISHI 06/19/20
MIVAR 24
NEC 36
2
Test by turning on the television and
changing channels.
≥Repeat the procedure until you find the code that allows
correct operation.
≥If your television brand is not listed or if the code listed for
your television does not allow control of your television, this
remote control is not compatible with your television.
[Note]
≥If your television brand has more than one code listed, select the
one that allows correct operation.
[1] ➡ [0]
10:
Brand Code
NOKIA 25/26/27
NORDMENDE 10
ORION 37
PHILIPS 05/06
PHONOLA 31/33
PIONEER 38
PYE 05/06
RADIOLA 05/06
SABA 10
SALORA 26
SAMSUNG 31/32/43
SANSUI 05/31/33
SANYO 21
SBR 06
SCHNEIDER 05/06/29/
30/31
SELECO 06/25
SHARP 18
SIEMENS 09
SINUDYNE 05/06/33
SONY 08
TELEFUNKEN 10/11/12/
13/14
THOMSON 10/15/44
TOSHIBA 16
WHITE 05/06
WESTINGHOUSE
When other Panasonic products
respond to this remote control
Change the remote control code on the main unit and the remote
control (the two must match) if you place other Panasonic products
close together.
Use "DVD 1", the factory set code, under normal circumstances.
1
While stopped
Press [FUNCTIONS].
2
Press [3, 4] to select "To Others"
and press [ENTER].
3
Press [3, 4] to select "SETUP" and
press [ENTER].
4
Press [3, 4] to select "Others" and
press [1].
5
Press [3, 4] to select "Remote
Control" and press [ENTER].
6
Press [3, 4] to select the code
("DVD 1", "DVD 2" or "DVD 3") and
press [ENTER].
SETUP Remote Control
Press "±" and "ENTER" together
for more than 2 seconds on the remote
Tuning
control.
Disc
Picture
7
To change the code on the remote control
While pressing [ENTER], press and
hold the numbered button ([1], [2] or
[3]) for more than 2 seconds.
8
Press [ENTER].
∫ When the following indicator appears on the
unit's display
Change the code on the remote control to match the main unit's
(➡ step 7).
[Note]
Executing "Shipping Condition" in the SETUP menu returns the
main unit code to "DVD 1". Change the remote control code to 1
(➡ step 7).
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
The unit's remote
control code
RQT8203
21
21