KEEWAY K-Light 125 Bedienungs- Und Wartungsanleitung Seite 145

ITEM
Control cables
Drive chain
Wheels and tyres
Brake and gearchange pedals
Brake and clutch lever
Kickstarter
Side stand
Chassis fasteners
• Make sure that operation is smooth.
• Lubricate if necessary.
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
• Check for damage.
• Check tyre condition and tread depth.
• Check air pressure.
• Correct if necessary.
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate kickstarter pivoting points if necessary.
• Make sure that operation is smooth.
• Lubricate pivoting points if necessary.
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
For your safety - pre-operation checks
CHECKS
4-3
EN
4