Internal Dsp Pre-Set Programs - dB Technologies 602 Bedienungsanleitung

English

3. INTERNAL DSP PRE-SET PROGRAMS

The powerful DSP of the ES 602-802 systems provides 8 configurations, allowing to digitally equalise the audio
signal according to different pre-set contexts and different usage needs. To select the relevant program just use a
small screwdriver and turn the rotary control to the desired program number:
1. FLAT: the setting performs no equalisation, directly outputting the input signal with no changes
2. BASS BOOST: it emphasises the low frequencies
3. BASS REDUCTION: it reduces the low frequencies, and is particularly suitable for reverberating
environments, to improve intelligibility.
4. PLAYBACK: it performs an equalisation that is particularly suitable for the playback of music tracks from
sources like CDs, MP3 players or other portable systems.
5. CLUB: this setting helps equalising frequencies to improve listening in small indoor environments
6. VOCAL: an equalisation emphasising the voice frequency range, particularly suitable when a
microphone has been connected to input (1), and the relevant selector (8) has been set to MIC, or for
the playback of speech.
7. MONITOR: This setting is suitable when using the ES 602-802 system as a personal monitor.
8. ANTIFEEDBACK: a setting using a notch filter to minimise the feedback risk, particularly when a cardioid
or hypercardioid microphone is used.
ES 602 - 802 REV. 1.1 Cod. 420120228 REV. 1.2
35