Installation; Installing The Satellite (Es 602) Or The Satellites (Es 802) On The Subwoofer - dB Technologies 602 Bedienungsanleitung

INSTALLATION

INSTALLING THE SATELLITE (ES 602) OR THE SATELLITES (ES 802) ON THE
SUBWOOFER
ES 602 and 802:
1. Screw the lower 25 mm pole into
the specifically designed hole on the
subwoofer top side, as shown.
2. Screw the telescopic pole onto the latter.
3. Then adjust the rod height, first loosening
the hand wheel, then inserting the pin
into the hole of the telescopic rod at the
desired height. Then retighten the hand
wheel.
ES 602:
1. Insert the ES-TOP A speaker on the pole using the
hole located in the lower section.
ES 802:
1. Flip ES-TOP B and stack it onto ES-TOP A
as shown.
2. Then insert ES-TOP B into the guide of ES-
TOP A, ensuring that the contacts touch
each other
3. To complete the installation of the 2
speakers slightly move them to the
outside as shown in the figure until they
lock with a click.
ES 602 - 802
30
ES-TOP B
upside down
ES-TOP A
English
ES-TOP A
Cod. 420120228 REV. 1.2