Input And Control Section - dB Technologies 602 Bedienungsanleitung

English

INPUT AND CONTROL SECTION

1. "CH1" CHANNEL
The "CH1" combo input allows to input both a connection from
MIXER/LINE and a microphone connection.
ATTENTION!
• Only use cables equipped with high-
quality genuine Neutrik® connectors.
2. "LINK" OUTPUT
It allows to link the output signal to another ES speaker
system or to another active speaker.
3. LIMITER LED AND ON-SIGNAL LED
When on, the limiter LED indicates that the internal protection circuit,
protecting the amplifier from distortion and the transducers from overloads,
has been activated. The on-signal LED indicates the presence of the input audio
signal.
ATTENTION!
• Never use the speaker for a prolonged time while the
limiter LED is on or blinking, indicating the equipment is
running under excessive stress conditions.
4. VOLUME MASTER CONTROL
It allows to adjust the master system volume.
5. DSP PRESET ROTARY
It allows to select through a rotary control the pre-set which is the most appropriate for the inputs and the
installation environment.
6. AUX VOLUME
It allows to adjust the auxiliary input volume.
ATTENTION!
• Only use cables equipped with high-quality genuine
Neutrik® connectors. Using different or poor-quality
connectors might affect the speaker operation.
7. RCA-TYPE STEREO INPUT
A stereo input allowing to connect a device like a CD or MP3 player or other external equipment, in addition or as
an alternative to the main input, "CH1 CHANNEL" (1).
ES 602 - 802 REV. 1.1
English
Cod. 420120228 REV. 1.2
27