WI-FI CONNECTION
1
Turn ON the Wi-Fi on your mobile device
and find IS-10_XXXX.
2
Connect to IS-10_XXXX using "password"
as the password.
3
Launch GN Control and go to DEVICE
SETUP > IS-10 > Wi-Fi Network Selection.
Turn ON the Wi-Fi and connect
to IS-10_XXXX
4
Here are listed the Wi-Fi networks
available, select the one you want the
IS-10 to connect to.
5
The IS-10 is now connected to the
selected Wi-Fi network.
6
Connect your mobile device to the same
network used by IS-10.
Launch GN Control and go to
DEVICE SETUP > IS-10 > Wi-Fi
Network Selection.
7
Select the Wi-Fi you want the
IS-10 to connect to.