Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.1 Camera mounting
1.
Mark the position of the screw holes using the mounting bracket on the wall.
2.
Drill the holes and insert the 4 plugs.
3.
Attach the camera, insert the screws through the mounting bracket into the dowels and
tighten the screws securely.
4.
Now point the camera at the area you want to monitor. Caution! Please be mindful of
public order and point the camera only at properties.
5.
Connect the (9V DC / 0.6A) power adapter (see image below) to the camera.
6.
Press the plugs firmly together so that no moisture can enter.
Note!
You can install 3 additional cameras (maximum 4 cameras). When adding cameras that were not in
the original box, the cameras must be paired with the receiver. Refer to the Pairing section (see
5.2.1 Camera setup - Pairing) on pairing the cameras in this manual.
4. Usage
This chapter explains all the operating functions of the camera set. So you know exactly what is
possible with this camera set.
4.1 Viewing live footage
When the set is plugged into the power socket for the first time, it is possible to see
directly on the monitor the images the camera is transmitting. You can directly watch
live what the camera sees.
4.2 Automatic recording
Via the motion detector settings (see 5.5.1 Motion detection settings), the camera can
be adjusted to record when motion is detected as desired. It is possible to set the
sensitivity and even hide areas. When an SD card is inserted in the monitor, the images
are stored and can be reviewed at a later time.
4.3 Manual recording
Besides automatic recording, there is also the option to record manually. When an SD
card is inserted in the monitor, the images are saved and can be reviewed at a later
time.
- 8 -
Werbung
