ELRO CZ40RIPS Handbuch Seite 16

5.6.1 Alert settings - Alert on monitor
The monitor offers the ability to trigger an alert alarm when motion is detected.
5.6.1.1 Warning on monitor - Alert volume
Set the volume of the alert. This sound consists of short beeps. When you turn up the
volume, the bars will be filled and an example sound will be heard.
5.6.1.2 Warning on monitor - Channel Alert On / Off
Turn warning on or off per channel.
5.6.1.3 Warning on monitor – Alert Mute Schedule
Set a schedule when the monitor should mute all alerts. This may be applicable when
you don't want to receive alerts at night, for example. To actually schedule and delete
recordings, tap
5.6.2 Alert settings - Alert on camera
Besides alerts via the monitor, the camera can also give an alert in the form of lighting
or a voice message. Use the switches for each camera to set whether they should give
illumination or a voice message.
This alert will be triggered when the camera has registered motion. Just make sure motion
detection is enabled.
5.7 Lighting settings
The ELRO CZ40RIPS has no lighting. This function is therefore not in operation.
.
- 15 -