Operation With User Key With Deadbolt Lock Function - Hafele Ft 200-System Betriebsanleitung

9.2 Operation with user key with deadbolt lock function

Prerequisites:
A user key with the deadbolt lock function also has the "latchbolt lock operation"
locking authorisation (self-locking action)
1. Hold the user key in front of the antenna for at
least 2 seconds.

Acoustic signal is heard. LED switches to
green. Acoustic signal is heard again.
LED briefly illuminates green.
3. Hold the user key in front of the antenna for at
least 2 seconds to close.

Acoustic signal is heard. LED continues to
illuminate green. Acoustic signal is heard
again. LED switches to red.
User key with deadbolt lock function (permanent open)

9.1 Operation with a normal user key
2x 1 s
2. Remove user key.

LED illuminates green permanently. All locks
are permanently open ("permanent open").
2x
4. Remove user key.

LED illuminates red permanently.
All locks are locked.
37