Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
There are 220v 60Hz and 115v 60Hz versions, the currents are on the rating plate.
•
To order, the bottle coolers can also be provided with type H power cables (England) and type B
(America).
Voltage:
Maximum consumption
Refrigerant:
Refrigerant charge
2. INSTALLATION
2.1 UNPACKING
-
It is advisable to unpack the cooler as soon as possible and check that it is not been damaged during
transport.
-
If the cooler has been damaged, it should be reported to the transport company and the damage
sustained stated on the delivery note.
-
Check that the cooler has been transported in accordance with the position indicated on the packaging.
If the cooler has not been transported in the recommended position, please place it in the correct
position and wait at least 24 hours before using it.
-
When unpacking the cooler, take care not to damage the product.
-
The recyclable elements are marked.
2.2 INFORMATION ON THE CLIMATE CLASS
-
The climate class indicated on the rating plate means:
-
4 = The bottle cooler functions properly in an environment of +30ºC and 55% RH.
-
5 = The bottle cooler functions properly in an environment of +40ºC and 40% RH.
-
7 = The bottle cooler has been tested in an environment of +35ºC and 75% RH.
-
The temperature of the product within these climate classes indicated on the rating plate is from +0ºC
to +6ºC when the bottle cooler is stabilised.
-
Limit
-
The ambient temperature/humidity limit is that shown on the rating plate according to the number.
2.3 LOCATION
Site the cooler in a ventilated location, away from heat sources, at 7 cm from the wall and 30 cm from the next
cooler. Please, ensure the machine is level and check that the door closes correctly.
See specification plate
See specification plate
See specification plate
See specification plate
www.combisteel.com
5
Werbung
