Pandora Camper Pro Bedienungsanleitung Seite 31

Press and hold for 2 sec when the
system is disarmed and ignition is on
Press and hold for 2 sec when ignition
is on
Press and hold for 6 sec.
Press and hold for10 sec.
Replacing an immobilizer tag battery
Carefully open the cover of the tag's battery compartment. Extract discharged battery and insert a
new one keeping in mind the correct polarity. Replacing a battery will not cause a loss of tag code
information, as authorization data is stored in the non-volatile memory of the MCU. Carefully close the
cover of the tag's battery compartment. All elements of construction should be rigidly locked in places.
If it is so, the tag can be operated as usually.
Update firmware of a radio tag
• Download the Pandora BT application (for
Android or iOS devices equipped with a
Bluetooth 4.0 Low Energy or higher module)
• Open the mobile app Pandora BT.
• Press and hold the button
tag until the 10th flash of the «SEND», indicator,
then release the button.
• Select the found device and select one of the
update option: FILE MANAGER – firmware will
be uploaded from the phone storage (only for
Android). INTERNET – firmware will be uploaded
by an internet connection.
USER MANUAL
Change the "Main owner's phone number"
Activate/deactivate Service mode
Pair a tag with the base unit
Firmware update
of the radio
Open here
EN
31