Security mode (the system is armed)
The system confirms arming with
system monitors security zones with separated warning and alarm level of triggering:
• Warning mode – this mode activates when there is a slight impact on the shock sensor or additional
senor. It is accompanied with
• Alarm mode - this mode activates when a sensor or one of the security zones is triggered. It
is accompanied with
canceled by an arming or disarming command.
If one of the security zones is triggered the system:
• records this event in its non-volatile memory;
• activates the alarm or warning mode;
• informs an owner by all available means;
• blocks the engine (in accordance with the settings and connections).
If one of the security zones is opened at the moment of arming, the system will produce
sound
4х
light
and
If one of the security zones fails, the system will forcibly turn off this zone. If a switch triggers
more than 9 times in a row, it will be disabled until the next arming. The shock/tilt/motion sensor is
temporarily deactivated (15 sec.) if it has been triggered more than 3 times in a row.
The system confirms disarming with
engine blocking (if the immobilizer function and additional blocking are not used). If there were alarm
events during the armed period, the system will produce
signals. The system continues to display all zones when it is disarmed, but the information is not saved
in the memory.
Security zones
• Interior temperature (status)
• Engine temperature (status)
• Outside sensor (status)
• Voltage of the on-board circuits (status)
• Engine operation control - RPM (status)
• Heater operating control (status)
• Fuel level (status)
• Parking (automatic gearbox) /Handbrake (manual gearbox) status
USER MANUAL
1х
sound
1х
light
and
30 sec.
light
and
warning signals.
2х
and
1х
light
signals. When the system is armed, the
3х
sound
signals.
30 sec.
sound
signals. The alarm signals can be
sound
and
2х
light
4х
sound
4х
signals. The system deactivate
and
4х
light
warning
EN
13