Pandora Camper Pro Bedienungsanleitung Seite 15

Stay Home mode
This mode is used to control the outer perimeter of a vehicle during parking when passengers are inside
the vehicle. This mode allows the system to protect your vehicle against intrusion through the parts of
the vehicle that can be open.
• The system will be armed silently when you activate the "Stay Home" mode, it will be confirmed
1х light
with signal. The system controls vehicle security zones and an additional gas sensor (it is
not included in the set) in this mode, built-in sensors (shock/tilt/motion) are disabled in this mode.
• The system will be disarmed when you deactivate the "Stay Home" mode, it will be confirmed with
2х sound and 1х
Slave mode
This mode allows arming and disarming using original vehicle control – an original key, button/sensor
of a keyless access entry system.
Slave mode can be implemented using analog connections or a digital protocol of a vehicle.
!
T
his mode is enabled by defaulT for a digiTal proTocol
recommended To acTivaTe The
. i
mode f This mode is acTivaTed
"s pin- ".
The ecreT code
Owner authorization devices and functions
Authorization devices
Authorization devices are Bluetooth-devices used to recognize an owner in the radio coverage zone
of the base unit. These devices allow implementing security and anti-hijack functions. You can use a
mobile phone, a radio tag BT-760 or a remote control D030 as an authorization device.
Alerts when using authorization devices
It is recommended to use an additional sound emitter Beeper when you use authorization devices.
USER MANUAL
light signals.
"p
rohibiT disarming when a Tag is absenT
,
iT will be possible To disarm The sysTem only when a Tag is in The coverage zone or using
. m
ore informaTion on loader
"
To increase securiTy feaTures of The
. . . i
pandorainfo com T is
slave
15
EN