Troubleshooting; Service Data - AEG MSB2548C-M Benutzerinformation

• To clean metal surfaces, use a usual
cleaning agent.
• Clean the appliance interior after each
use. Then you can remove dirt more easily
and it does not burn on.
• Clean stubborn dirt with a special cleaner.
• Clean all accessories regularly and let
them dry. Use a soft cloth with warm water
and a cleaning agent.

11. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
11.1 What to do if...
Problem
The appliance does not op‐
erate.
The appliance does not op‐
erate.
The appliance does not op‐
erate.
The appliance does not op‐
erate.
The lamp does not operate. The lamp is defective.
The display shows .
There is sparking in the
cavity.
There is sparking in the
cavity.
The turntable set makes
scratching or grinding
noise.
The appliance stop to oper‐
ate without a clear reason.

11.2 Service data

If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
Possible cause
The appliance is deactivated.
The appliance is not plugged in.
The fuse in the fuse box is blown.
The door is not closed properly.
The Child Safety Lock is active.
There are metal dishes or dishes with
metal trim.
There are metal skewers or aluminium
foil that touches the interior walls.
There is an object or dirt below the glass
cooking tray.
There is a malfunction.
• To soften the hard to remove remains, boil
a glass of water at full microwave power
for 2 to 3 minutes.
• To remove odours, mix a glass of water
with 2 tsp of lemon juice and boil at full
microwave power for 5 minutes.
Remedy
Activate the appliance.
Plug in the appliance.
Check the fuse. If the fuse blows more
than one time, contact a qualified electri‐
cian.
Make sure that nothing blocks the door.
The lamp has to be replace.
Deactivate the Child Safety Lock. Hold
for 3 seconds.
Remove the dish from the appliance.
Make sure that the skewers and foil
does not touch the interior walls.
Clean the area below the glass cooking
tray.
If this situation repeats call the Author‐
ised Service Center.
The necessary data for the service centre is
on the rating plate. The rating plate is on the
appliance. Do not remove the rating plate
from the appliance.
ENGLISH 57