Quax SMART Comfort 05 05 19 Serie Handbuch Seite 23

SMART Comfort
4. Parts list and assembing the changing table
O : 6 x Cylindrical nut
P : 6 x Bolt M6*60 mm
T : 2 x Eccentric
U : 2 x Connector
4.1 Assembling the structure
Insert the cylindrical nuts O in the provided openings at the bottom of parts B and assemble them with the
legframes AL and AR as shown in the upper detail drawing by inserting and fastening the bolts P through
the drillings of the frames. Repeat this action with part C.
4.2 Installing the top
Tighten the connectors U in the provided openings at the underside of the top M. Insert the eccentrics T
in the provided openings at the innerside of both parts B. Place the top with its connectors in the provided
openings on top of the parts B and tighten the eccentrics.
Bad- en luiermeubel
05 05 19xx
Wickel- und Bademöbel
Baignoire et table à langer
Bath and diaper cabinet
Quax Quax
First dreams First dreams
® ®
First steps First steps
23