Setting Up Your New Scooter - SoFlow SO ONE PRO Bedienungsanleitung

1.2.

Setting up your new Scooter

Your new So Flow scooter has been thoroughly checked and part-assembled by our
technicians.
It's almost ready to ride – just follow these simple set-up instructions and you'll be ready
to go!
Watch the SOFLOW video on
setting up your e-scooter
2. Secure the latch
Pull down the latch mechanism until it clips
securely.
Warning!
Do not ride the scooter if the latch is loose.
copyright by www.soflow.com
1. Raise the stem
Remove the protective packaging but do
not lift the scooter out of the cardboard
frame just yet.
Lift the stem until it clips upright into the
frame.
3. Charge the battery
You can charge your e-scooter by plugging
the charging cable into the charging port.
Once fully charged the charger light will
change from red to green.
5/52