Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.6.
Usage of "Find My" APP for SO ONE Pro
Users of an Iphone are able to connect the scooter with the "Find my" function to track the
location of the scooter.
Important, for all steps below the scooter screen must be on.
Setup your scooter / Add scooter
1.
Open the "Find My" APP.
2.
Keep the SO ONE Pro near your Iphone, then tap
on + and "add other item".
3.
Press the power button on the scooter for 2 sec.
to power on the scooter.
4.
Press the left turning button for 7seconds until
you hear a signal tone.
5.
"SO ONE Pro" will pop up on the Iphone screen,
then tap "connect".
6.
Enter a name and choose an Emoji, then tap
continue.
7.
Tap "Register item to your Apple ID", then continue again.
8.
Tap "Done" to complete the setup.
Learn More - Serial number lookup
Press and hold the right turning button and brake lever for 7 seconds until you hear a signal tone, afterwards
release both.
How to Disable
Press and hold the right turning button 7 seconds until you hear a signal tone, afterwards release the right
turning button.
Factory Reset
Press and hold the left turning button and brake lever for 7 seconds until you hear a signal tone, afterwards
release both.
How to exit «Disable» state
Press and hold the left turning button 7 seconds until you hear a signal tone, afterwards release the left
turning button.
How to switch between «Nearby», «Separated» and «Disconnect»
Nearby
Connection Status Disconnected.
Separated
Nearby status timeout:
Reboot (The battery of this device cannot be removed. Reboot is not supported).
Disconnect
Turn off the Bluetooth on your iPhone.
copyright by www.soflow.com
12/52
Werbung
