General Operation; Hold; Erase All / Reset; Auto-Off When Not In Use - Dnt Funtastic Easy Bedienungsanleitung

Hold

To protect the keys against unintentional settings, set
the HOLD switch into the ON position. In this case the
recorder keeps the function that was selected before.
By pushing any key during the HOLD- mode the
display will show

Erase all / Reset

With this function you can set the FunTastic Easy into the original condi-
tions, all data stored on the FunTastic Easy Data will be erased.
Press the ERASE button and the REC/STOP button at
the same time (more than 4 sec.) until the
flashes on the display (meanwhile
ing). To erase the files, finally press the ERASE button
again (during
mode, press any other button.

Auto-Off when not in use

If for more then 1 minute the unit is not in use, it switches off automati-
cally.

General operation

and the
is flashing).To cancel the erase
- 33 -
icon.
is flash-