clage Zip HydroTap G4 BCS 160/175 Gebrauchsanleitung Seite 31

LCD Screen Operation - Section C
IV. Booster
This function should only be considered when a Booster unit is
installed.
Note: Failing to make the correct selection for 'Booster' will eff ect
product performance.
V. CO -Flush
2
5. When only CO
Air and water inside the carbonizer are fl ushed out with carbon diox-
ide to ensure that the carbonizer operates correctly.
VI. Lux Sensor Calibration
Note: Perform calibration under normal light conditions
A
discharge out of the fi tting, select [STOP]
2
1. Press the [MENU] button for
main menu.
2. Press the [Install] button.
3. Press the [Booster] button.
4. In the next screen, press but-
A
ton to enable the Booster.
5. Dispense hot water for 30 secs
and check the outlet hose
from the Booster is warm.
1. Press the [MENU] button for
main menu.
2. Press the [Install] button.
3. Press the [Purge CO
4. In the next screen select
[START]
1. Press the [MENU] button for
main menu.
2. Press the [Install] button.
3. Press the [Lux Sensor Calibra-
tion] button.
4. The lights on the tap head will
fl ash to confi rm calibration.
31
] button.
2