ZANKER KOU25724XK Benutzerinformation Seite 20

Step 1
Turn off the oven. Wait until the
oven is cold.
Back lamp
Step 1
Turn the glass cover to remove it.
Step 2
Clean the glass cover.
Step 3
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4
Install the glass cover.
13. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
13.1 What to do if...
In any cases not included in this table please
contact with an Authorised Service Centre.
Problem
The oven does not
heat up.
The door gasket is
damaged.
The display shows
"12.00".
The lamp does not
work.
20 ENGLISH
Before you replace the lamp:
Step 2
Disconnect the oven from the
Check if...
The fuse is blown.
Do not use the oven.
Contact an Authorised
Service Centre.
There was a power
cut. Set the time of
day.
The lamp is burnt out.
mains.
13.2 Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on the
front frame of the appliance cavity. Do not
remove the rating plate from the appliance
cavity.
We recommend that you write the data
here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Step 3
Put a cloth on the bottom of the
cavity.
.....................................
....
.....................................
....
.....................................
....